|
|
|
 |
 |
| |
We make custom made curtains with a variety of pleating styles available
 |
|
 |
|
 |
|
 |
|
 |
|
 |
| Single Pleat |
|
Dutch or Twin Pleat |
|
French Pleat |
|
Invert Pleat |
|
Pencil Pleat |
|
New York Pleat |
Visit our showroom to browse and select fabric samples to take home. We can then arrange for one of our expert consultants to come to you with advice and support, including a full measure and quote service.
Click here to
E-mail us with your window measurements for information about fabric quantity and an estimated quote.
How to measure your windows
 |
| |
Windows with an architrave:
1. Illustration A shows the most popular position of the curtain track where its top edge is flush with the top edge of the architrave.
2. Depending on your preference, either measure the drop from the top of the upper sill architrave to 15cm below the lower sill architrave, or alternatively measure to the floor. This is your "Curtain Drop"
3. To allow the curtains to stand back from the window edge when drawn open add 20cm to either side of the window measurement. eg Window width + 40cm = Track length
|
| |
 |
| |
Windows without an architrave
1. Our illustration B. again shows the recommended position of the track, its top edge 40mm above the top edge of the window sill.
2. For window length curtains measure from where the top of the track would be positioned to 15cm below the sill. For floor length measure to the floor.
3. Again, to allow the curtains to stand back from the window edge when drawn open, add 20cm to either side of the window measurement. eg Window width + 40cm = Track length
|
|
|
|
| |
|
|
|
|
|
 |
| |
|
|
|
|
